heating

heating, process and system of raising the temperature of an enclosed space for the primary purpose of ensuring the comfort of the occupants. By regulating the ambient temperature, heating also serves to maintain a building’s structural, mechanical, and electrical systems.

Historical development

The earliest method of providing interior heating was an open fire. Such a source, along with related methods such as fireplaces, cast-iron stoves, and modern space heaters fueled by gas or electricity, is known as direct heating because the conversion of energy into heat takes place at the site to be heated. A more common form of heating in modern times is known as central, or indirect, heating. It consists of the conversion of energy to heat at a source outside of, apart from, or located within the site or sites to be heated; the resulting heat is conveyed to the site through a fluid medium such as air, water, or steam.

Except for the ancient Greeks and Romans, most cultures relied upon direct-heating methods. Wood was the earliest fuel used, though in places where only moderate warmth was needed, such as China, Japan, and the Mediterranean, charcoal (made from wood) was used because it produced much less smoke. The flue, or chimney, which was first a simple aperture in the centre of the roof and later rose directly from the fireplace, had appeared in Europe by the 13th century and effectively eliminated the fire’s smoke and fumes from the living space. Enclosed stoves appear to have been used first by the Chinese about 600 bc and eventually spread through Russia into northern Europe and from there to the Americas, where Benjamin Franklin in 1744 invented an improved design known as the Franklin stove. Stoves are far less wasteful of heat than fireplaces because the heat of the fire is absorbed by the stove walls, which heat the air in the room, rather than passing up the chimney in the form of hot combustion gases.

Discover how ordinary objects work, and expand your understanding of the familiar.

SIGN UP

" height="20" alt="HEW Logo">

Thank you for signing up!"

Back to homepage

By clicking "Sign Up", you consent to the Britannica Privacy Policy and Terms of Use.

Central heating appears to have been invented in ancient Greece, but it was the Romans who became the supreme heating engineers of the ancient world with their hypocaust system. In many Roman buildings, mosaic tile floors were supported by columns below, which created air spaces, or ducts. At a site central to all the rooms to be heated, charcoal, brushwood, and, in Britain, coal were burned, and the hot gases traveled beneath the floors, warming them in the process. The hypocaust system disappeared with the decline of the Roman Empire, however, and central heating was not reintroduced until some 1,500 years later.

Central heating was adopted for use again in the early 19th century when the Industrial Revolution caused an increase in the size of buildings for industry, residential use, and services. The use of steam as a source of power offered a new way to heat factories and mills, with the steam conveyed in pipes. Coal-fired boilers delivered hot steam to rooms by means of standing radiators. Steam heating long predominated in the North American continent because of its very cold winters. The advantages of hot water, which has a lower surface temperature and milder general effect than steam, began to be recognized about 1830. Twentieth-century central-heating systems generally use warm air or hot water for heat conveyance. Ducted warm air has supplanted steam in most newly built American homes and offices, but in Great Britain and much of the European continent, hot water succeeded steam as the favoured method of heating; ducted warm air has never been popular there. Most other countries have adopted either the American or European preference in heating methods.

Central-heating systems and fuels

The essential components of a central-heating system are an appliance in which fuel may be burned to generate heat; a medium conveyed in pipes or ducts for transferring the heat to the spaces to be heated; and an emitting apparatus in those spaces for releasing the heat either by convection or radiation or both. Forced-air distribution moves heated air into the space by a system of ducts and fans that produce pressure differentials. Radiant heating, by contrast, involves the direct transmission of heat from an emitter to the walls, ceiling, or floor of an enclosed space independent of the air temperature between them; the emitted heat sets up a convection cycle throughout the space, producing a uniformly warmed temperture within it.

Air temperature and the effects of solar radiation, relative humidity, and convection all influence the design of a heating system. An equally important consideration is the amount of physical activity that is anticipated in a particular setting. In a work atmosphere in which strenuous activity is the norm, the human body gives off more heat. In compensation, the air temperature is kept lower in order to allow the extra body heat to dissipate. An upper temperature limit of 24° C (75° F) is appropriate for sedentary workers and domestic living rooms, while a lower temperature limit of 13° C (55° F) is appropriate for persons doing heavy manual work.

Explore Britannica Premium!

The trusted destination for professionals, college students, and lifelong learners.

SUBSCRIBE

In the combustion of fuel, carbon and hydrogen react with atmospheric oxygen to produce heat, which is transferred from the combustion chamber to a medium consisting of either air or water. The equipment is so arranged that the heated medium is constantly removed and replaced by a cooler supply—i.e., by circulation. If air is the medium, the equipment is called a furnace, and if water is the medium, a boiler or water heater. The term “boiler” more correctly refers to a vessel in which steam is produced, and “water heater” to one in which water is heated and circulated below its boiling point.

Natural gas and fuel oil are the chief fuels used to produce heat in boilers and furnaces. They require no labour except for occasional cleaning, and they are handled by completely automatic burners, which may be thermostatically controlled. Unlike their predecessors, coal and coke, there is no residual ash product left for disposal after use. Natural gas requires no storage whatsoever, while oil is pumped into storage tanks that may be located at some distance from the heating equipment. The growth of natural-gas heating has been closely related to the increased availability of gas from networks of underground pipelines, the reliability of underground delivery, and the cleanliness of gas combustion. This growth is also linked to the popularity of warm-air heating systems, to which gas fuel is particularly adaptable and which accounts for most of the natural gas consumed in residences. Gas is easier to burn and control than oil, the user needs no storage tank and pays for the fuel after he has used it, and fuel delivery is not dependent on the vagaries of motorized transport. Gas burners are generally simpler than those required for oil and have few moving parts. Because burning gas produces a noxious exhaust, gas heaters must be vented to the outside. In areas outside the reach of natural-gas pipelines, liquefied petroleum gas (propane or butane) is delivered in special tank trucks and stored under pressure in the home until ready for use in the same manner as natural gas. Oil and gas fuels owe much of their convenience to the automatic operations of their heating plant. This automation rests primarily on the thermostat, a device that, when the temperature in a space drops to a predetermined point, will activate the furnace or boiler until the demand for heat is satisfied. Automatic heating plants are so thoroughly protected by thermostats that nearly every conceivable circumstance that could be dangerous is anticipated and controlled.