stone
Quick Summary
Stone is a naturally occurring solid aggregate of one or more minerals or mineraloids. It is a fundamental material in construction and has been used by humans since the Stone Age.12
Types and Uses of Stone
Dimension stone, such as marble, granite, limestone, sandstone, and slate, is quarried for building and decorative purposes. These stones are extracted selectively and require time-consuming methods.3
Stone is strong in compression, making it suitable for walls, columns, and arches. However, its weakness in tension limits its use for beams and floor supports. Rubble, or roughly broken stones set in mortar, is the simplest form of stonework. Ashlar masonry, using precisely cut blocks, is used for monumental architecture.45
Stone in Sculpture
Stone has been the primary material for monumental sculpture due to its durability and availability. Igneous, sedimentary, and metamorphic rocks are all used. Marble, granite, sandstone, and limestone are common choices. While stone is heavy and lacks tensile strength, skilled sculptors can overcome these limitations to create detailed works.5
Ask Britannica AI about this topic
Britannica doesn't have a full article on this topic, so we've curated a list of our relevant coverage.
quarryDimension stones are extracted in a highly selective manner, using time-consuming and expensive methods for freeing the blocks from the surrounding rock.
Read MoreDimension stones are extracted in a highly selective manner, using time-consuming and expensive methods for freeing the blocks from the surrounding rock.
Read More
miningQuarrying…used to form entire structures, stone is greatly valued for its aesthetic appeal, durability, and ease of maintenance. The most popular types include granite, limestone, sandstone, marble, slate, gneiss, and serpentine. All natural stone used for structural support, curtain walls, veneer, floor tile, roofing, or strictly ornamental purposes is called…
Read More…used to form entire structures, stone is greatly valued for its aesthetic appeal, durability, and ease of maintenance. The most popular types include granite, limestone, sandstone, marble, slate, gneiss, and serpentine. All natural stone used for structural support, curtain walls, veneer, floor tile, roofing, or strictly ornamental purposes is called…
Read More
Mesopotamian art and architecture…Assyrians, in the north, good-quality stone was plentiful, but the cost of quarrying and transport, combined with an obstinate conservatism, caused it to be regarded as a luxury material and its use to be confined to sculptured ornament and conspicuous architectural features.
Read More…Assyrians, in the north, good-quality stone was plentiful, but the cost of quarrying and transport, combined with an obstinate conservatism, caused it to be regarded as a luxury material and its use to be confined to sculptured ornament and conspicuous architectural features.
Read More
Mesopotamian art and architectureSculpture…from a single block of stone weighing up to 30 tons, roughly shaped in the quarry and then carved in situ.
Read More…from a single block of stone weighing up to 30 tons, roughly shaped in the quarry and then carved in situ.
Read More
constructionStone construction in Egypt…a new technology of cut-stone construction emerged in the temples and pyramids of the 4th dynasty (c. 2575–c. 2465 bce). Egypt, unlike Mesopotamia or the Indus valley, had excellent deposits of stone exposed above ground; limestone, sandstone, and granite were all available. But the extracting, moving, and working of…
Read More…a new technology of cut-stone construction emerged in the temples and pyramids of the 4th dynasty (c. 2575–c. 2465 bce). Egypt, unlike Mesopotamia or the Indus valley, had excellent deposits of stone exposed above ground; limestone, sandstone, and granite were all available. But the extracting, moving, and working of…
Read More
garden and landscape designJapanese…design, but the cult of stones is also central to Japanese gardening. The nine stones, five standing and four recumbent, used in Buddhist gardens were symbols of the nine spirits of the Buddhist pantheon; the shapes and postures chosen were presumed to have a relationship with the character and history…
Read More…design, but the cult of stones is also central to Japanese gardening. The nine stones, five standing and four recumbent, used in Buddhist gardens were symbols of the nine spirits of the Buddhist pantheon; the shapes and postures chosen were presumed to have a relationship with the character and history…
Read More
IndiaCraft and technologyStone, although largely absent from the great alluvial plain of the Indus, played a major role in Harappan material culture. Scattered sources, mostly on the periphery, were exploited as major factory sites. Thus, the stone blades found in great numbers at Mohenjo-daro originated in the…
Read MoreStone, although largely absent from the great alluvial plain of the Indus, played a major role in Harappan material culture. Scattered sources, mostly on the periphery, were exploited as major factory sites. Thus, the stone blades found in great numbers at Mohenjo-daro originated in the…
Read More
harbours and sea worksBreakwater designBoulders of suitably dense natural rock are generally much more satisfactory and, in a project completed in the United Kingdom in the 1960s, it was found by experiment, and subsequently confirmed in experience, that armouring of this type could be composed of blocks of as…
Read MoreBoulders of suitably dense natural rock are generally much more satisfactory and, in a project completed in the United Kingdom in the 1960s, it was found by experiment, and subsequently confirmed in experience, that armouring of this type could be composed of blocks of as…
Read More
history of MesopotamiaThe backgroundStone is mostly lacking in southern Mesopotamia, although limestone is quarried in the desert about 35 miles to the west and “Mosul marble” is found not far from the Tigris in its middle reaches. Metal can only be obtained in the mountains, and the same…
Read MoreStone is mostly lacking in southern Mesopotamia, although limestone is quarried in the desert about 35 miles to the west and “Mosul marble” is found not far from the Tigris in its middle reaches. Metal can only be obtained in the mountains, and the same…
Read More
mosaicStoneStone, therefore, was long dominant, and throughout antiquity the natural colours of stone provided the basic range of tints at the artist’s disposal. They put their mark not only on the earliest Greek works but continued to determine colour schemes far into Roman times.…
Read MoreStone, therefore, was long dominant, and throughout antiquity the natural colours of stone provided the basic range of tints at the artist’s disposal. They put their mark not only on the earliest Greek works but continued to determine colour schemes far into Roman times.…
Read More
Oceanic art and architectureMaterials and techniquesThe carving of stone, although obviously presenting far more arduous and time-consuming problems than wood, was undertaken remarkably often and occurred throughout the Pacific Islands; hammering, pecking, and polishing were the main methods. Even so resistant a material as jade was mastered by grinding with abrasives.
Read MoreThe carving of stone, although obviously presenting far more arduous and time-consuming problems than wood, was undertaken remarkably often and occurred throughout the Pacific Islands; hammering, pecking, and polishing were the main methods. Even so resistant a material as jade was mastered by grinding with abrasives.
Read More
ceremonial objectPlaces of worship and sacrificeIf represented in stone, the tree evolved into a column gnomon (a perpendicular shaft), such as the Buddhist lat, the sacred pillar (matzeva) of the ancient Hebrews, or the obelisk of pre-Hellenistic Egypt (before the 4th century bce, especially from the 3rd millennium to the early 1st millennium…
Read MoreIf represented in stone, the tree evolved into a column gnomon (a perpendicular shaft), such as the Buddhist lat, the sacred pillar (matzeva) of the ancient Hebrews, or the obelisk of pre-Hellenistic Egypt (before the 4th century bce, especially from the 3rd millennium to the early 1st millennium…
Read More
sculptureCarving tools and techniquesStone is carved mostly with steel tools that resemble cold chisels. To knock off the corners and angles of a block, a tool called a pitcher is driven into the surface with a heavy iron hammer. The pitcher is a thick, chisel-like tool with a…
Read MoreStone is carved mostly with steel tools that resemble cold chisels. To knock off the corners and angles of a block, a tool called a pitcher is driven into the surface with a heavy iron hammer. The pitcher is a thick, chisel-like tool with a…
Read More
sculpturePrimaryThroughout history, stone has been the principal material of monumental sculpture. There are practical reasons for this: many types of stone are highly resistant to the weather and therefore suitable for external use; stone is available in all parts of the world and can be obtained in…
Read MoreThroughout history, stone has been the principal material of monumental sculpture. There are practical reasons for this: many types of stone are highly resistant to the weather and therefore suitable for external use; stone is available in all parts of the world and can be obtained in…
Read More
sculptureSmoothing and polishingStone carvings are smoothed by rubbing down with a graded series of coarse and fine abrasives, such as carborundum, sandstone, emery, pumice, and whiting, all used while the stone is wet. Some stones, such as marble and granite, will take a high gloss; others are…
Read MoreStone carvings are smoothed by rubbing down with a graded series of coarse and fine abrasives, such as carborundum, sandstone, emery, pumice, and whiting, all used while the stone is wet. Some stones, such as marble and granite, will take a high gloss; others are…
Read More
hand tool…as common ancestors the sharpened stones that were the keys to early human survival. Rudely fractured stones, first found and later “made” by hunters who needed a general-purpose tool, were a “knife” of sorts that could also be used to hack, to pound, and to grub. In the course of…
Read More…as common ancestors the sharpened stones that were the keys to early human survival. Rudely fractured stones, first found and later “made” by hunters who needed a general-purpose tool, were a “knife” of sorts that could also be used to hack, to pound, and to grub. In the course of…
Read More
hand toolStone as a material…a tool material, the term rock covers a wide variety of rocks, ranging from the dense and grainless flint and obsidian to coarse-grained granite and quartzite. Each kind of rock has certain unique properties that are further influenced by temperature and humidity. Stone of any kind is difficult to manipulate.…
Read More…a tool material, the term rock covers a wide variety of rocks, ranging from the dense and grainless flint and obsidian to coarse-grained granite and quartzite. Each kind of rock has certain unique properties that are further influenced by temperature and humidity. Stone of any kind is difficult to manipulate.…
Read More
architectureStoneIn most areas where stone is available, it has been favoured over other materials for the construction of monumental architecture. Its advantages are durability, adaptability to sculptural treatment, and the fact that it can be used in modest structures in its natural state. But…
Read MoreIn most areas where stone is available, it has been favoured over other materials for the construction of monumental architecture. Its advantages are durability, adaptability to sculptural treatment, and the fact that it can be used in modest structures in its natural state. But…
Read More
architectureExpression of technique…weight, and crystalline composition of stone masonry traditionally have been emphasized by devices not necessarily connected with structural methods: rustication (finishing in rough, uneven surfaces), drafting (more refined, linear cutting), and polishing. Niches and other indentations, projecting courses, or frames around openings suggest massiveness. In nonbearing walls, a smooth, unbroken…
Read More…weight, and crystalline composition of stone masonry traditionally have been emphasized by devices not necessarily connected with structural methods: rustication (finishing in rough, uneven surfaces), drafting (more refined, linear cutting), and polishing. Niches and other indentations, projecting courses, or frames around openings suggest massiveness. In nonbearing walls, a smooth, unbroken…
Read More
miningHistory…evidences of building with quarried stone was the construction (2600 bce) of the great pyramids in Egypt, the largest of which (Khufu) is 236 metres (775 feet) along the base sides and contains approximately 2.3 million blocks of two types of limestone and red granite. The limestone is believed to…
Read More…evidences of building with quarried stone was the construction (2600 bce) of the great pyramids in Egypt, the largest of which (Khufu) is 236 metres (775 feet) along the base sides and contains approximately 2.3 million blocks of two types of limestone and red granite. The limestone is believed to…
Read More
Western architectureThe Orientalizing period…replacement of wooden pillars with stone ones and the translation of the carpentry and brick structural forms into stone equivalents. This provided an opportunity for the expression of proportion and pattern, an expression that eventually took the form of the invention or evolution of the stone “orders” of architecture. These…
Read More…replacement of wooden pillars with stone ones and the translation of the carpentry and brick structural forms into stone equivalents. This provided an opportunity for the expression of proportion and pattern, an expression that eventually took the form of the invention or evolution of the stone “orders” of architecture. These…
Read More
Islamic artsArchitecture in Iraq, Syria, and Anatolia…Crescent was the translating into stone of new structural systems first developed in brick. The most impressive instance of this lies in the technically complex muqarnas domes and half domes or in the muqarnas pendentives of Syrian buildings. Elaborate mihrabs were also made of multicoloured stones that were carefully cut…
Read More…Crescent was the translating into stone of new structural systems first developed in brick. The most impressive instance of this lies in the technically complex muqarnas domes and half domes or in the muqarnas pendentives of Syrian buildings. Elaborate mihrabs were also made of multicoloured stones that were carefully cut…
Read More
Islamic artsArchitecture…feature was technical virtuosity in stone construction. At times this led to a superb purity of form, as in the Gate of the Cotton Merchants in Jerusalem or the complex of the Barqūq mosque in Cairo. At other times, as in the Mamluk architecture of Baybars and Qāʾit Bāy, there…
Read More…feature was technical virtuosity in stone construction. At times this led to a superb purity of form, as in the Gate of the Cotton Merchants in Jerusalem or the complex of the Barqūq mosque in Cairo. At other times, as in the Mamluk architecture of Baybars and Qāʾit Bāy, there…
Read More
Korean architectureThe Three Kingdoms period (57 bce–668 ce)…have been completely destroyed, three stone pagodas still exist, two in the Paekche area and one in Kyŏngju. At first Koreans built replicas of Chinese multistory wooden pagodas; but, since wooden structures were expensive and difficult to maintain, the idea arose, first in Paekche, of using stone. Paekche architects initially…
Read More…have been completely destroyed, three stone pagodas still exist, two in the Paekche area and one in Kyŏngju. At first Koreans built replicas of Chinese multistory wooden pagodas; but, since wooden structures were expensive and difficult to maintain, the idea arose, first in Paekche, of using stone. Paekche architects initially…
Read More
bridgeWood and stoneWood is relatively weak in both compression and tension, but it has almost always been widely available and inexpensive. Wood has been used effectively for small bridges that carry light loads, such as footbridges. Engineers now incorporate laminated wooden beams and arches into some…
Read MoreWood is relatively weak in both compression and tension, but it has almost always been widely available and inexpensive. Wood has been used effectively for small bridges that carry light loads, such as footbridges. Engineers now incorporate laminated wooden beams and arches into some…
Read More
bridgeEarly wood and stone bridgesThe first bridges were simply supported beams, such as flat stones or tree trunks laid across a stream. For valleys and other wider channels—especially in East Asia and South America, where examples can still
Read MoreThe first bridges were simply supported beams, such as flat stones or tree trunks laid across a stream. For valleys and other wider channels—especially in East Asia and South America, where examples can still
Read More
bridgeStone arch bridgesDuring the Renaissance the Italian architect Andrea Palladio took the principle of the truss, which previously had been used for roof supports, and designed several successful wooden bridges with spans up to 30 meters (100 feet). Longer bridges, however, were still made…
Read MoreDuring the Renaissance the Italian architect Andrea Palladio took the principle of the truss, which previously had been used for roof supports, and designed several successful wooden bridges with spans up to 30 meters (100 feet). Longer bridges, however, were still made…
Read More
roadCretan stone roadsAt about this time the Minoans on the island of Crete built a 30-mile (50-km) road from Gortyna on the south coast over the mountains at an elevation of about 4,300 feet (1,300 metres) to Knossos on the north coast. Constructed of layers…
Read MoreAt about this time the Minoans on the island of Crete built a 30-mile (50-km) road from Gortyna on the south coast over the mountains at an elevation of about 4,300 feet (1,300 metres) to Knossos on the north coast. Constructed of layers…
Read More
roadNew paving materials…common paving materials were hoof-sized stone blocks, similarly sized wooden blocks, bricks, McAdam’s broken stone, and occasionally asphalt and concrete. McAdam’s broken stone provided the cheapest pavement, but its unbound surface was difficult to maintain and was usually either slimy or dusty as a consequence of water, weather, and copious…
Read More…common paving materials were hoof-sized stone blocks, similarly sized wooden blocks, bricks, McAdam’s broken stone, and occasionally asphalt and concrete. McAdam’s broken stone provided the cheapest pavement, but its unbound surface was difficult to maintain and was usually either slimy or dusty as a consequence of water, weather, and copious…
Read More
roadPavement…have base courses of broken stone pieces either compacted into place in the style of McAdam or glued together with bitumen to form asphalt. In order to maintain workability, the stones are usually less than 1.5 inches in size and often less than 1 inch. Initially the bitumen must be…
Read More…have base courses of broken stone pieces either compacted into place in the style of McAdam or glued together with bitumen to form asphalt. In order to maintain workability, the stones are usually less than 1.5 inches in size and often less than 1 inch. Initially the bitumen must be…
Read More