adsorption chiller

adsorption chiller, any device designed to cool interior spaces through adsorption, a process that uses solid substances to attract to their surfaces molecules of gases or solutions with which they are in contact. Instead of using large amounts of electricity, the cooling process in an adsorption chiller is driven by the evaporation and condensation of water. Adsorption chillers provide an energy-efficient alternative to conventional refrigeration and air conditioning, because energy to drive the cooling system comes from water warmed by waste heat, such as exhaust or steam from industrial processes or heat directly generated from solar panels or other devices.

Both adsorption coolers and more-conventional compressor cooling units use a liquid refrigerant with a very low boiling point. In both devices, when the refrigerant boils and evaporates, it takes some heat away with it, providing cooling. (The effect is analogous to a human becoming cool by sweating.) However, the two devices differ in how they change a refrigerant from a gas back to a liquid and repeat the cycle. A compressor cooling unit is more energy-intensive; it uses an electrically powered compressor to increase the pressure on the gas. In contrast, an adsorption chiller—which is made up of an evaporator, two adsorption chambers, and a condenser—warms the gas back to a liquid without using any moving parts. Both adsorption chambers are filled with silica gel (the adsorbent is often lithium bromide), and water is the refrigerant. In one chamber, that gel acts as a carrier material for water in the evaporator. The gel also lowers the humidity inside the evaporator, which allows the water refrigerant to evaporate at a low temperature. (In addition, the atmospheric pressure within some evaporators may be kept low to reduce the evaporation point of water substantially, sometimes to as low as 2 °C [36 °F].) As the water molecules in the evaporator undergo a phase change from a liquid to a gas, heat is removed from the system, which lowers the temperature of the remaining water, and the water is chilled for use in cooling applications.

Water vapour and heat are removed from the gel in the first adsorption chamber through a valve that leads to a condenser containing liquid-cooling water. Water vapour from a second adsorbing chamber (whose purpose is to cycle water warmed by waste heat through the gel) is also connected to the condenser. The warm water in the second adsorption chamber adds water vapour to the condenser, where it condenses and releases its energy to the cooling water. Inside the condenser, the cooling water receives the heat from both chambers, and much of the water vapour becomes liquid water, which may be expelled or allowed to enter the chilled water loop inside the evaporator through an expansion valve.

Discover how ordinary objects work, and expand your understanding of the familiar.

SIGN UP

" height="20" alt="HEW Logo">

Thank you for signing up!"

Back to homepage

By clicking "Sign Up", you consent to the Britannica Privacy Policy and Terms of Use.

The technology behind adsorption cooling can be traced back to the mid-19th century, when French scientist Ferdinand Carré invented a similar system, known as absorption refrigeration, that used water and ammonia. Other designs followed, including one first patented in 1928 by German-born American physicist Albert Einstein and his former student, Hungarian-born American physicist Leo Szilard. Public acceptance of the Einstein-Szilard chiller was hampered by the device’s high energy cost, the onset of the Great Depression in 1929, and the introduction of freon (a key component of compressor cooling units) in 1930.

Adsorption and absorption chillers have been increasingly promoted as low-energy, quiet, and environmentally friendly alternatives to compressors. They do not emit greenhouse gases or use chlorofluorocarbon or hydrochlorofluorocarbon refrigerants, nor do they consume much electricity or emit much heat into the atmosphere or waterways. Adsorption chillers use a very small amount of electricity because only their pumps require electrical power to operate. As a result, they are a popular option in locations where electricity is costly or difficult to obtain, where compressor noise can be a distraction, and where there is a readily available heat source.