frequency-division multiplexing

References

Images

Analog multiplexing, as employed in the North American telephone systemIn frequency-division multiplexing (FDM), 12 separate voice signals, each of 4-kilohertz bandwidth, are modulated onto carrier waves in the 60–108-kilohertz range. These modulated signals are combined to form a single complex group signal. Groups are further combined to form a hierarchy of increasing bandwidth and voice-carrying capacity.

frequency-division multiplexing

electronics

Also known as: FDM

Written by

The Information Architects of Encyclopaedia Britannica

Learn about this topic in these articles:

telecommunication
Modulation
…the resulting combination is a frequency-division multiplexed signal, as is discussed in Multiplexing. Frequently there is no central combining point, and the communications channel itself acts as a distributed combine. An example of the latter situation is the broadcast radio bands (from 540 kilohertz to 600 megahertz), which permit simultaneous…
Read More
…the resulting combination is a frequency-division multiplexed signal, as is discussed in Multiplexing. Frequently there is no central combining point, and the communications channel itself acts as a distributed combine. An example of the latter situation is the broadcast radio bands (from 540 kilohertz to 600 megahertz), which permit simultaneous…
Read More
telecommunication
Frequency-division multiplexing
In frequency-division multiplexing (FDM), the available bandwidth of a communications channel is shared among multiple users by frequency translating, or modulating, each of the individual users onto a different carrier frequency. Assuming sufficient frequency separation of the carrier frequencies that the modulated signals…
Read More
In frequency-division multiplexing (FDM), the available bandwidth of a communications channel is shared among multiple users by frequency translating, or modulating, each of the individual users onto a different carrier frequency. Assuming sufficient frequency separation of the carrier frequencies that the modulated signals…
Read More

multiplexing
In frequency-division multiplexing, each message is identified with a separate subcarrier frequency; all of these subcarriers are then combined to modulate the carrier frequency. For wire transmission, the modulated subcarriers may be transmitted directly without the introduction of a carrier frequency.
Read More
In frequency-division multiplexing, each message is identified with a separate subcarrier frequency; all of these subcarriers are then combined to modulate the carrier frequency. For wire transmission, the modulated subcarriers may be transmitted directly without the introduction of a carrier frequency.
Read More

telegraph
Signal processing and transmission
In 1918 modulated carriers with frequency-division multiplexing, in which several different frequencies are transmitted simultaneously over the same line, were introduced. At the receiving end the different signals were separated from one another by frequency-selective filters and sent to separate decoding units, thus allowing as many as 24 telegraph signals…
Read More
In 1918 modulated carriers with frequency-division multiplexing, in which several different frequencies are transmitted simultaneously over the same line, were introduced. At the receiving end the different signals were separated from one another by frequency-selective filters and sent to separate decoding units, thus allowing as many as 24 telegraph signals…
Read More

telemetry
Multiplexing and sampling.
…another in time sequence; in frequency division, each channel is assigned on an individually allocated, discrete frequency band, and these bands are then combined for simultaneous transmission. Finally, data may be handled within the telemetry system in a continuous (analog) or discrete (digital) way. The latter systems are relatively more…
Read More
…another in time sequence; in frequency division, each channel is assigned on an individually allocated, discrete frequency band, and these bands are then combined for simultaneous transmission. Finally, data may be handled within the telemetry system in a continuous (analog) or discrete (digital) way. The latter systems are relatively more…
Read More

telephone
From analog to digital transmission
…transmission band—a process known as frequency-division multiplexing (FDM). However, particularly with the development of fibre optics (see below), these analog systems were rapidly replaced by digital systems. In digital transmission, which may also be carried over the coaxial and microwave systems, the telephone signals are first converted from an analog…
Read More
…transmission band—a process known as frequency-division multiplexing (FDM). However, particularly with the development of fibre optics (see below), these analog systems were rapidly replaced by digital systems. In digital transmission, which may also be carried over the coaxial and microwave systems, the telephone signals are first converted from an analog…
Read More