bending test

Written by

The Information Architects of Encyclopaedia Britannica

Last updated

June 22, 2026

Quick Summary

A bending test is a method used in materials testing to determine a material's tensile strength. This test is particularly useful for brittle materials like glass and ceramics, which are difficult to test directly in tension.

In a bending test, a material sample is subjected to a load that causes it to bend. This bending action creates tensile stresses on one side of the material and compressive stresses on the opposite side. If the material is significantly stronger in compression than in tension, failure will initiate on the tensile side, providing an indication of its tensile strength. However, this method is limited to specific materials and conditions where the exact tensile stress at failure can be accurately determined.1

Summary created from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles.

3 Britannica Sources

Ask Britannica AI about this topic

Britannica doesn't have a full article on this topic, so we've curated a list of our relevant coverage.

papermaking
Strength and durability
…resistance of paper to a bending force is evident in the various operations of its manufacture and in its many uses. The range in this property extends from very soft, flexible tissues to rigid boards. Thicker and heavier sheets tend to be stiff, whereas soft, flexible sheets are light and…
Read More
…resistance of paper to a bending force is evident in the various operations of its manufacture and in its many uses. The range in this property extends from very soft, flexible tissues to rigid boards. Thicker and heavier sheets tend to be stiff, whereas soft, flexible sheets are light and…
Read More

materials testing
Static shear and bending tests
Inplane shear tests indicate the deformation response of a material to forces applied tangentially. These tests are applied primarily to thin sheet materials, either metals or composites, such as fibreglass reinforced plastic.
Read More
Inplane shear tests indicate the deformation response of a material to forces applied tangentially. These tests are applied primarily to thin sheet materials, either metals or composites, such as fibreglass reinforced plastic.
Read More