Large Electron-Positron collider

…particle accelerators such as the Large Electron-Positron (LEP) collider at the European Organization for Nuclear Research (CERN) in Geneva and the Tevatron at the Fermi National Accelerator Laboratory (Fermilab) in Batavia, Illinois.

…built so far was the LEP machine at CERN, which operated from 1989 to 2001. LEP reached a maximum of a little over 100 GeV per beam in a magnet ring that was 27 km (17 miles) in circumference and that occupied a 4-metre- (13-foot-) wide tunnel lying, on average,…

In 1989 CERN inaugurated the Large Electron-Positron (LEP) collider, with a circumference of almost 27 km (17 miles), which was able to accelerate both electrons and positrons to 45 GeV per beam (increased to 104 GeV per beam by 2000). LEP facilitated extremely precise measurements of the Z particle, which…

At CERN the Large Electron-Positron (LEP) collider was designed to accelerate electrons and positrons initially to 50 GeV and later to about 100 GeV in a ring with a circumference of 27 km (17 miles). This is probably the practical limit for such machines.

…(17-mile) tunnel that housed its Large Electron-Positron Collider (LEP). The tunnel is circular and is located 50–175 metres (165–575 feet) belowground on the border between France and Switzerland. The LHC ran its first test operation on September 10, 2008. An electrical problem in a cooling system on September 18 resulted…

…positrons, for injection into the LEP collider. Together with the smaller PS, it continues to form part of CERN’s integrated complex of accelerators.

… particle accelerator known as the Large Electron-Positron (LEP) collider came into operation.