Iceboating is a winter sport that involves sailing and racing on ice using modified boats. An iceboat is like a sailboat equipped with thin blades or runners that glide across the ice surface. It features a fore-and-aft spar called the backbone, which is mounted on a flexible crosspiece or runner plank. This plank has steel runners at each end. A third runner, used for steering, is controlled by the helmsman with a tiller. Iceboats can reach speeds up to four times the speed of the wind, with recorded speeds exceeding 140 miles per hour. These crafts move so fast because they create their own wind from their velocity, which supplements the natural wind.

How does an iceboat move on ice?

Iceboating involves sailing and racing on ice using modified boats equipped with thin blades or runners. An iceboat consists of a fore-and-aft spar, called the backbone, mounted on a runner plank with steel runners at each end. A third runner, controlled by a tiller, is used for steering. A mast carries one or two sails. Iceboats can achieve speeds up to four times the wind speed, with recorded speeds exceeding 140 miles per hour. While sailing downwind limits the speed to that of the wind, iceboats reach much faster speeds sailing across the wind. This is because the boat creates a wind from its own velocity that supplements the natural wind.

What parts make up an iceboat?

An iceboat is propelled across ice using sails and runners. It consists of a spar, sometimes wide enough to have a cockpit, which is mounted on a flexible crosspiece, or runner plank. This plank is perpendicular to the spar and has a steel runner at each end. A third runner, used for steering, is mounted at the fore or aft end of the hull and controlled by a tiller. A mast carries one or two sails, typically a mainsail and a jib. Modern iceboats use high-strength steel in their structural elements.

How do you steer and control an iceboat?

Iceboats are steered using a tiller that controls a runner, which is a blade on the ice. Rudders work through unequal water pressure. When the rudder turns, the boat moves away from the side the rudder is on. Iceboats reach high speeds by sailing across the wind, using both the natural wind and the wind created by the boat's own velocity. The placement of rudders and control surfaces at the stern of a ship allows them to benefit from the increased velocity in the propeller outflow.

Where and when are iceboating competitions usually held?

Iceboating competitions, governed by associations like the Eastern Ice Yachting Association (founded in 1937) and the Northwestern Ice Yachting Association (founded in 1912), are held in the United States and Canada. The sport is popular in the Northeast and Midwest, with clubs in Wisconsin, Illinois, Michigan, and Ontario participating. Races typically follow yachting rules, using a windward-leeward course to ensure boats sail across the wind.

iceboating

Introduction References & Edit History Quick Facts & Related Topics

Images

Quick Facts

Also called:: Ice Yachting

Related Topics:: winter sports

See all related content

iceboating

sport

Also known as: ice yachting

Written and fact-checked by

Britannica Editors

History

Top Questions

What is iceboating?
Iceboating is a winter sport that involves sailing and racing on ice using modified boats. An iceboat is like a sailboat equipped with thin blades or runners that glide across the ice surface. It features a fore-and-aft spar called the backbone, which is mounted on a flexible crosspiece or runner plank. This plank has steel runners at each end. A third runner, used for steering, is controlled by the helmsman with a tiller.

Iceboats can reach speeds up to four times the speed of the wind, with recorded speeds exceeding 140 miles per hour. These crafts move so fast because they create their own wind from their velocity, which supplements the natural wind.
1 Britannica Source
1. iceboating
Created from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles.
How does an iceboat move on ice?
Iceboating involves sailing and racing on ice using modified boats equipped with thin blades or runners. An iceboat consists of a fore-and-aft spar, called the backbone, mounted on a runner plank with steel runners at each end. A third runner, controlled by a tiller, is used for steering. A mast carries one or two sails.

Iceboats can achieve speeds up to four times the wind speed, with recorded speeds exceeding 140 miles per hour. While sailing downwind limits the speed to that of the wind, iceboats reach much faster speeds sailing across the wind. This is because the boat creates a wind from its own velocity that supplements the natural wind.
1 Britannica Source
1. iceboating
Created from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles.
What parts make up an iceboat?
An iceboat is propelled across ice using sails and runners. It consists of a spar, sometimes wide enough to have a cockpit, which is mounted on a flexible crosspiece, or runner plank. This plank is perpendicular to the spar and has a steel runner at each end.

A third runner, used for steering, is mounted at the fore or aft end of the hull and controlled by a tiller. A mast carries one or two sails, typically a mainsail and a jib. Modern iceboats use high-strength steel in their structural elements.
2 Britannica Sources
1. iceboating
2. Definition of iceboat
Created from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles.
How do you steer and control an iceboat?
Iceboats are steered using a tiller that controls a runner, which is a blade on the ice. Rudders work through unequal water pressure. When the rudder turns, the boat moves away from the side the rudder is on.

Iceboats reach high speeds by sailing across the wind, using both the natural wind and the wind created by the boat's own velocity. The placement of rudders and control surfaces at the stern of a ship allows them to benefit from the increased velocity in the propeller outflow.
3 Britannica Sources
Created from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles.
Where and when are iceboating competitions usually held?
Iceboating competitions, governed by associations like the Eastern Ice Yachting Association (founded in 1937) and the Northwestern Ice Yachting Association (founded in 1912), are held in the United States and Canada. The sport is popular in the Northeast and Midwest, with clubs in Wisconsin, Illinois, Michigan, and Ontario participating. Races typically follow yachting rules, using a windward-leeward course to ensure boats sail across the wind.
1 Britannica Source
1. iceboating
Created from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles.

iceboating, a winter sport of sailing and racing on ice in modified boats. An iceboat is basically a sailboat that travels on thin blades, or runners, on the surface of the ice. An iceboat consists first of a single fore-and-aft spar, called the backbone, which may be wide enough to have a cockpit in its hull to carry the crew. This spar, or hull, is securely mounted on a broad, flexible crosspiece, or runner plank, which is at a right angle to it and which has a steel runner at each of its two ends. A third runner, the steering runner, is mounted at either the fore or aft end of the hull and is controlled by the helmsman using a tiller. A vertical mast carries either one or two sails, usually a mainsail and a jib. Smaller iceboats dispense with a cockpit in the hull and instead have a shallow, elliptical tray mounted on the backbone and upon which the one- or two-man crew sits. The modern iceboat’s structural elements are made of high-strength steel.

Although there are hints of iceboating in the archaeological past as far back as 2000 bc in what is now the Scandinavian region, iceboating as a means of winter transport dates firmly only to the 17th and 18th centuries on the frozen Gulf of Riga and on the canals of the Netherlands. In 1790 the first iceboat appeared on the Hudson River in New York.

The sport began in the mid-19th century, the Poughkeepsie Ice Yacht Club being formed in 1865 and the Hudson River Ice Yacht Club in 1870. A Swedish club was founded in 1901, and in 1928 the European Ice Yachting Union was formed with Latvia, Lithuania, Estonia, Sweden, Austria, and Germany as members.

By clicking “Sign Up”, you consent to the Britannica Privacy Policy and Terms of Use.

Assorted sports balls including a basketball, football, soccer ball, tennis ball, baseball and others.

Britannica Quiz

American Sports Nicknames

The wooden ice yachts of the 19th century were large and had six or seven crew members. The Icicle was 22.9 yards (21 m) long and had 1,070 square feet (99 square m) of sail. Ice yachting was a rich man’s sport. In 1900 the fleet of the Hudson River club numbered more than 50, including 6 of the first class with more than 600 square feet (54.75 square m) of sail. These large iceboats reached speeds which at that time were the fastest ever attained by any vehicle. The American iceboat Scud, for example, sailed at 107 miles per hour (172 km/h) in 1885.

In about 1931, Starke Meyer of Milwaukee, Wis., designed a hull with the steering runner at the bow and the runner plank at the stern, instead of the other way around, as in most previous designs. The downward and forward thrust of the mast, located between the two points of support, served to increase rudder traction and reduce the tendency of the craft to spin on the ice. Meyer’s bow-steering design defeated all competition, and smaller versions, called skeeters, with a sail of only about 75 square feet (7 square m), showed that they could sail safely and fast. By 1940 the design had crystallized, and the skeeter, or class E boat, as it is now designated, enjoyed a rapid growth. Skeeters were able to rival the larger iceboats in sailing speed, and they have dominated all open competitions over the past decades. The standard skeeter has a hull that is 22 feet (6.7 m) long. The DN-60, a boat with 60 square feet (5.6 square m) of sail, designed in the hobby shop of The Detroit News in 1937, suddenly caught on in the late 1950s and has been popular ever since. The standard DN is 12 feet (3.6 m) long with 60 to 80 square feet (5.6 to 7.4 square m) of sail.

The iceboat can reach at least four times the speed of the wind propelling it, and speeds of over 140 miles per hour (220 km/h) have been recorded. An iceboat that is sailing downwind can reach no greater a speed than that of the wind itself. But an iceboat can reach much faster speeds when it sails across the wind rather than being pushed along by it, since the boat creates a wind from the velocity of its own movement that greatly supplements the natural wind. These principles were only vaguely understood in the early days of iceboat racing, and the traditional rig with a stern-mounted rudder was the standard design despite the boat’s forward thrust sometimes lifting the stern rudder from the ice and sending the whole boat into a spin.

Iceboating became less popular in Europe after World War II but remained popular in the United States and Canada, mainly in the Northeast, where the ruling body is the Eastern Ice Yachting Association (founded 1937), and in the Midwest, where clubs from Wisconsin, Illinois, Michigan, and Ontario founded the Northwestern Ice Yachting Association in 1912. The regional associations have approximately six boat classes, ranging from 75 to 350 square feet (7 to 32 square m) of sail.

Explore Britannica Premium!

The trusted destination for professionals, college students, and lifelong learners.

Association, national, and international races are held. Iceboat racing is generally like regular yachting in terms of right-of-way and overtaking. Races are typically run on a windward-leeward course such that the boats are usually sailing across the wind.

This article was most recently revised and updated by Amy Tikkanen.

iceboating

Thank you for signing up!