- Key People:
- Charles Mauguin
- Related Topics:
- phlogopite
- chloritoid
- paragonite
- biotite
- lepidolite
mica
-
What is mica?
Mica is a group of hydrous potassium, aluminum silicate minerals with a layered structure. Micas are found in igneous, sedimentary, and metamorphic rocks.
Mica minerals have perfect cleavage into thin, elastic sheets and range in color from colorless to black, brown, red-brown, greenish-brown, and blue-green. The general formula for micas is XY_2ā3Z_4O_10(OH, F)_2, where X, Y, and Z represent different elements. Muscovite and phlogopite are used for electrical condensers, insulation sheets, and heating elements because of their flexibility, low conductivity, and high dielectric strength. Ground mica is used as a filler, absorbent, and lubricant.
1 Britannica SourceCreated from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles. -
What does mica look like?
Mica, a hydrous potassium, aluminum silicate mineral, has a layered structure and is a type of phyllosilicate. The side faces of mica prisms are typically rough, sometimes striated and dull, while the flat ends are smooth and shiny.
Micas exhibit a perfect cleavage into thin, elastic sheets and come in various colors. Muscovites can be colorless, greenish, blue-green, pinkish, brownish, or cinnamon-tan. Biotites range from black and brown to red-brown and blue-green, while phlogopites are honey brown and lepidolites are nearly colorless, pink, lavender, or tan. The luster of micas is usually splendent, with some cleavage faces appearing pearly.
Micas are found in igneous, sedimentary, and metamorphic rocks. They can form from crystallizing magmas, from fluids associated with magmatic activity, from fluids circulating during metamorphism, and from alteration processes.
1 Britannica SourceCreated from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles. -
Where is mica commonly found?
Mica, a group of hydrous potassium, aluminum silicate minerals with a layered structure, is a principal rock-forming mineral. It appears in igneous, sedimentary, and metamorphic rocks and can result from various processes like the consolidation of magma, fluid deposition from magmatic activities, and alterations from weathering.
Distinct mica crystals can be found in certain igneous rocks and pegmatites, sometimes measuring several meters across. Micas also occur as irregular masses or thin plates in most rocks. Biotite is found in igneous rocks, pegmatite masses, and metamorphic rocks. Muscovite is common in metamorphic gneisses, schists, and phyllites, and also in some granitic rocks and complex granitic pegmatites. Phlogopite is rare in igneous rocks but appears in ultramafic rocks like kimberlites. Lepidolite is almost exclusively in lithium-bearing pegmatites but also in a few granites. Glauconite forms in marine environments.
1 Britannica SourceCreated from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles. -
What are the main types of mica?
Mica is a group of minerals with 28 known species, but only six are common rock-forming minerals. These include:
* Muscovite: the most common light-colored mica
* Biotite: typically black or nearly black
* Phlogopite: typically brown
* Paragonite: macroscopically indistinguishable from muscovite
* Lepidolite: generally pinkish to lilac in color
* Glauconite: a green species that does not have the same general macroscopic characteristics as the other micasThe rock-forming micas (other than glauconite) can be divided into two groups: those that are light-coloured (muscovite, paragonite, and lepidolite) and those that are dark-coloured (biotite and phlogopite).
5 Britannica SourcesCreated from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles. -
How is mica used in everyday products?
Mica's unique properties, such as perfect cleavage, flexibility, and low conductivity, make it useful in everyday products. Muscovite and phlogopite are used as electrical insulators and in optical instruments. Ground mica serves as a dusting medium, filler, absorbent, and lubricant. It also adds luster to wallpaper. Lepidolite is a source of lithium for heat-resistant glass. Glauconite, in greensands, acts as fertilizer and a water softener.
1 Britannica SourceCreated from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles. -
Why is mica important in the electronics industry?
Mica is highly valued in the electronics industry due to its unique properties. Muscovite and phlogopite, types of mica, possess perfect cleavage, flexibility, and elasticity. They are infusible and have low thermal and electrical conductivity, as well as high dielectric strength, making them ideal for various applications.
Mica is used in electrical condensers and as insulation sheets between commutator segments and in heating elements. Precise sheets of muscovite are utilized in optical instruments. Ground mica serves as a dusting medium, filler, absorbent, and lubricant. Additionally, it is used in wallpaper manufacturing for a shiny luster.
1 Britannica SourceCreated from Britannica articles using AI. AI can make mistakes, so verify using Britannica articles.
mica, any of a group of hydrous potassium, aluminum silicate minerals. It is a type of phyllosilicate, exhibiting a two-dimensional sheet or layer structure. Among the principal rock-forming minerals, micas are found in all three major rock varietiesāigneous, sedimentary, and metamorphic.
General considerations
Of the 28 known species of the mica group, only 6 are common rock-forming minerals. Muscovite, the common light-coloured mica, and biotite, which is typically black or nearly so, are the most abundant. Phlogopite, typically brown, and paragonite, which is macroscopically indistinguishable from muscovite, also are fairly common. Lepidolite, generally pinkish to lilac in colour, occurs in lithium-bearing pegmatites. Glauconite, a green species that does not have the same general macroscopic characteristics as the other micas, occurs sporadically in many marine sedimentary sequences. All of these micas except glauconite exhibit easily observable perfect cleavage into flexible sheets. Glauconite, which most often occurs as pelletlike grains, has no apparent cleavage.
The names of the rock-forming micas constitute a good example of the diverse bases used in naming minerals: Biotite was named for a personāJean-Baptiste Biot, a 19th-century French physicist who studied the optical properties of micas; muscovite was named, albeit indirectly, for a placeāit was originally called āMuscovy glassā because it came from the Muscovy province of Russia; glauconite, although typically green, was named for the Greek word for blue; lepidolite, from the Greek word meaning āscale,ā was based on the appearance of the mineralās cleavage plates; phlogopite, from the Greek word for firelike, was chosen because of the reddish glow (colour and lustre) of some specimens; paragonite, from the Greek āto mislead,ā was so named because it was originally mistaken for another mineral, talc.
Chemical composition
The general formula for minerals of the mica group is XY2ā3Z4O10(OH, F)2 with X = K, Na, Ba, Ca, Cs, (H3O), (NH4); Y = Al, Mg, Fe2+, Li, Cr, Mn, V, Zn; and Z = Si, Al, Fe3+, Be, Ti. Compositions of the common rock-forming micas are given in the Click Here to see full-size table
table.
Few natural micas have end-member compositions. For example, most muscovites contain sodium substituting for some potassium, and diverse varieties have chromium or vanadium or a combination of both replacing part of the aluminum; furthermore, the Si:Al ratio may range from the indicated 3:1 up to about 7:1. Similar variations in composition are known for the other micas. Thus, as in some of the other groups of minerals (e.g., the garnets), different individual pieces of naturally occurring mica specimens consist of different proportions of ideal end-member compositions. There are, however, no complete series of solid solutions between any dioctahedral mica and any trioctahedral mica.
Crystal structure
Micas have sheet structures whose basic units consist of two polymerized sheets of silica (SiO4) tetrahedrons. Two such sheets are juxtaposed with the vertices of their tetrahedrons pointing toward each other; the sheets are cross-linked with cationsāfor example, aluminum in muscoviteāand hydroxyl pairs complete the coordination of these cations (see figure). Thus, the cross-linked double layer is bound firmly, has the bases of silica tetrahedrons on both of its outer sides, and has a negative charge. The charge is balanced by singly charged large cationsāfor example, potassium in muscoviteāthat join the cross-linked double layers to form the complete structure. The differences among mica species depend upon differences in the X and Y cations.
Although the micas are generally considered to be monoclinic (pseudohexagonal), there also are hexagonal, orthorhombic, and triclinic forms generally referred to as polytypes. The polytypes are based on the sequences and number of layers of the basic structure in the unit cell and the symmetry thus produced. Most biotites are 1M and most muscovites are 2M; however, more than one polytype is commonly present in individual specimens. This feature cannot, however, be determined macroscopically; polytypes are distinguished by relatively sophisticated techniques such as those employing X-rays.
The micas other than glauconite tend to crystallize as short pseudohexagonal prisms. The side faces of these prisms are typically rough, some appearing striated and dull, whereas the flat ends tend to be smooth and shiny. The end faces are parallel to the perfect cleavage that characterizes the group.
Physical properties
The rock-forming micas (other than glauconite) can be divided into two groups: those that are light-coloured (muscovite, paragonite, and lepidolite) and those that are dark-coloured (biotite and phlogopite). Most of the properties of the mica group of minerals, other than those of glauconite, can be described together; here they are described as pertaining simply to micas, meaning the micas other than glauconite. Properties of the latter are described separately later in the discussion.
The perfect cleavage into thin elastic sheets is probably the most widely recognized characteristic of the micas. The cleavage is a manifestation of the sheet structure described above. (The elasticity of the thin sheets distinguishes the micas from similarly appearing thin sheets of chlorite and talc.) The rock-forming micas exhibit certain characteristic colours. Muscovites range from colourless, greenish to blue-green to emerald-green, pinkish, and brownish to cinnamon-tan. Paragonites are colourless to white; biotites may be black, brown, red to red-brown, greenish brown, and blue-green. Phlogopites resemble biotites but are honey brown. Lepidolites are nearly colourless, pink, lavender, or tan. Biotites and phlogopites also exhibit the property termed pleochroism (or, more properly for these minerals, dichroism): When viewed along different crystallographic directions, especially using transmitted polarized light, they exhibit different colours or different absorption of light or both.
The lustre of the micas is usually described as splendent, but some cleavage faces appear pearly. The minutely crystalline variety consisting of muscovite or paragonite (or both), generally referred to as sericite, is silky.
Mohs hardness of the micas is approximately 21/2 on cleavage flakes and 4 across cleavage. Consequently, micas can be scratched in either direction with a knife blade or geologic pick. Hardness is used to distinguish micas from chloritoid, which also occurs rather commonly as platy masses in some metamorphic rocks; chloritoid, with a Mohs hardness of 61/2, cannot be scratched with a knife blade or geologic pick.
Specific gravity for the micas varies with composition. The overall range is from 2.76 for muscovite to 3.2 for iron-rich biotite.
Glauconite occurs most commonly as earthy to dull, subtranslucent, green to nearly black granules generally referred to as pellets. It is attacked readily by hydrochloric acid. The colour and occurrence of this mineral in sediments and sedimentary rocks formed from those sediments generally are sufficient for identification.

" height="20" alt="HEW Logo">