traditional ceramics: Quick Facts

Written and fact-checked by

The Information Architects of Encyclopaedia Britannica

Photos

Stages in the slip casting of a thin-walled whiteware container. Clay powder is mixed in water together with a dispersing agent, which keeps the clay particles suspended evenly throughout the clay-water slurry, or slip. The slip is poured into a plaster mold, where water is drawn out by capillary action and a cast is formed by the deposition of clay particles on the inner surfaces of the mold. The remaining slip is drained, and the cast is allowed to dry partially before the drain hole is plugged and the mold separated. The unfinished ware is given a final drying in an oven before it is fired into a finished product.

Figure 2: Phase diagram of the alumina-silica system. Depending on the temperature and on the content of silica and alumina, aluminosilicate clays, upon heating, form various combinations of alumina, cristobalite, mullite, and liquid. The formation of liquid phases is important in the partial vitrification of clay-based ceramics.

Buddhist guardian deity

Safavid ceramic bottle

Korean dragon jar

Tang twin dragon vase

See All Images →

Topics

industrial ceramics brick and tile advanced ceramics conductive ceramics capacitor dielectric and piezoelectric ceramics optical ceramics magnetic ceramics advanced structural ceramics nuclear ceramics tribological ceramics automotive ceramics

Dig Deeper: More Articles That Discuss This Topic

cigar. cigars. Hand-rolled cigars. Cigar manufacturing. Tobacco roller. Tobacco leaves, Tobacco leaf

Building Blocks of Everyday Objects